3x suurennus optinen laajennus

41 arviota tuotteelle 3X Magnification Optical Expander

Asiakkaiden kuvat

Gabriel S

07/05/2024

Works fine, no problems with focus and fits well with threads, reduces huge beam divergence especially for my Class 4 638nm ones, although there are power losses during the conversion, my 638nm diode Oclaro HL63193MG from 520mW to ~420mW although I cannot confirm exactly, losses are between 20% and 10% this will also depend on the divergence. Beam starts very thick but it gets smaller and smaller, during the thickness beam loses a bit of visibility but after some meters divergence becomes more beautiful and decent.

Gabriel S

07/05/2024

Works fine, no problems with focus and fits well with threads, reduces huge beam divergence especially for my Class 4 638nm ones, although there are power losses during the conversion, my 638nm diode Oclaro HL63193MG from 520mW to ~420mW although I cannot confirm exactly, losses are between 20% and 10% this will also depend on the divergence. Beam starts very thick but it gets smaller and smaller, during the thickness beam loses a bit of visibility but after some meters divergence becomes more beautiful and decent.

Gabriel S

07/05/2024

Works fine, no problems with focus and fits well with threads, reduces huge beam divergence especially for my Class 4 638nm ones, although there are power losses during the conversion, my 638nm diode Oclaro HL63193MG from 520mW to ~420mW although I cannot confirm exactly, losses are between 20% and 10% this will also depend on the divergence. Beam starts very thick but it gets smaller and smaller, during the thickness beam loses a bit of visibility but after some meters divergence becomes more beautiful and decent.

Gabriel S

07/05/2024

Works fine, no problems with focus and fits well with threads, reduces huge beam divergence especially for my Class 4 638nm ones, although there are power losses during the conversion, my 638nm diode Oclaro HL63193MG from 520mW to ~420mW although I cannot confirm exactly, losses are between 20% and 10% this will also depend on the divergence. Beam starts very thick but it gets smaller and smaller, during the thickness beam loses a bit of visibility but after some meters divergence becomes more beautiful and decent.

1. Lars B

   Verified

   13/09/2025

   Erinomainen

   Exactly what I want. I am very satisfied! 10/10

2. Gabriel S

   Verified

   07/05/2024

   Useful to reduce huge beam divergences

   Works fine, no problems with focus and fits well with threads, reduces huge beam divergence especially for my Class 4 638nm ones, although there are power losses during the conversion, my 638nm diode Oclaro HL63193MG from 520mW to ~420mW although I cannot confirm exactly, losses are between 20% and 10% this will also depend on the divergence.
   Beam starts very thick but it gets smaller and smaller, during the thickness beam loses a bit of visibility but after some meters divergence becomes more beautiful and decent.

   

   

   

   
3. Greg Adam

   Verified

   26/10/2023

   3x optical expander

   works good with striker, only .6 watt loss, cleans up and extends beam. 1.4 watt loss with silver, i think it has to do with NM. greg

4. Ronald Herrera

   Verified

   12/10/2023

   Awsome!!!

   With a very low cost for a quality piece in the received item, there’s no much room ocupied and filled already with EXCELLENCE !!!

5. Alexsandro Cesconetto

   Verified

   07/03/2023

   No reviews at the moment

   So far I have not been able to evaluate the performance of the product, as the laser was delivered with a problem and never worked so I could test the optics.

Valitettavasti yksikään arvostelu ei vastaa nykyisiä valintojasi